Source: Ningbo Eagle Intelligent Technology Co., Ltd

Vibrating plate feeding is a lot of production automation equipment, the first process, its role is to disorderly parts arranged in order to send out. Vibration plate with stainless steel and aluminum two categories. The advantages and disadvantages of the two are as follows:
First, the scope of application:
Stainless steel vibration plate for a wide range, 2-60mm size range of parts may be sent out, aluminum alloy vibration plate is usually only applicable to smaller size parts, generally below 20mm, the smaller parts, with aluminum plate more Advantage.
Second, feeding stability:
Aluminum alloy vibration plate because of its track is CNC precision machining, the feed stability and reliability far better than stainless steel vibration plate. As long as the ship is in good condition, you can keep, rarely need to repair, adjust and other after-sales service.
Third, the run-time noise:
Aluminum alloy disk running noise is much lower than the stainless steel plate.
Fourth, wear resistance:
As the aluminum alloy vibration plate surface after hardening treatment, extremely wear-resistant, generally use more than 10 years the surface will not change. While the use of stainless steel may soon be surface wear, resulting in feeding instability.
Fifth, the cost of production:
Single-production aluminum alloy vibration plate production costs are higher, small batch production when the difference is not large, high-volume production of aluminum alloy vibration plate cost is low.
Six, delivery:
General stainless steel shock plate from the order to complete the fastest three or five days can be. The first development of aluminum alloy vibration plate needs to be designed, processed, surface treatment and other processes, generally takes about fifteen days. But as long as the first to make the subsequent production of aluminum alloy production cycle shorter.

Recommended product keywords：Cixi vibration plate,Ningbo vibration plate,Vibration plate,Non - standard vibration plate,Non-standard equipment,Non-standard automation