Vibration plate Electromagnet is the core of the electromagnetic vibration chassis, without the vibration plate is completely unable to work, vibration chassis is the vibration plate, electromagnet, armature, spring, mounting seat, vibration pad composition. The use of the controller to produce the same frequency as the system with the same pulse current to electromagnet excitation, the system resonance, armature and vibration plate will be quickly pulled to the electromagnet. Because the decline is very fast, so the material will float in the air, and in the role of gravity to the tray.

Vibration plate adjustment steps and points:
1. Confirm that the vibrating body is locked on the disk;
2. Adjust the controller button to the middle position;
3. Turn on the power to see if the speed of the vibration plate is reached;
4. If you do not meet the requirements, will lock the shrapnel of the fixed screw loose any one, see the vibration speed changes;
5. If the shrapnel fixing screw is loosened, the vibration speed becomes faster, indicating that the shrapnel is too thick, the number or thickness of the shrapnel is reduced, and then the debugging is carried out again.

Then under the action of the spring, the armature and the vibrating plate are pushed back, and the material in the tray is moved forward. This effect is repeated at a rate of 3000 to 10,000 or more per minute, so that the material in the tray is smoothly moved and the vibration plate does not cause damage to the material.