Source: Ningbo Eagle Intelligent Technology Co., Ltd

Vibration plate adjustment steps and points have the following seven points:

1. Make sure that the vibrating body is locked on the disc.

2. Adjust the controller knob to the middle position

3. Turn on the power to see if the vibration delivery speed meets the requirements.

4. If you do not meet the requirements, do not disconnect the power supply will lock the shrapnel of the fixed screw loose any one, see the vibration speed changes.

5. If the loose shrapnel fixing screw vibration speed becomes faster, the shrapnel is too thick, moderate reduction in the number of shrapnel or shrapnel thickness and then step 4,

6. If the loose shrapnel fixing screw vibration speed slows down, the shrapnel is too thin, moderate reduction in the number of shrapnel or shrapnel thickness and then step 4, again debugging.

7. If step 4 is adjusted, the vibration speed does not change, it means that the spring has been adjusted.

Vibration plate manufacturers we produce products are Ross vibration plate, rivets vibration plate, transformer vibration plate, connector vibration plate and other industries dedicated vibration plate.

Recommended products Keywords: Cixi vibration plate Ningbo vibration plate non-standard vibration plate